Tessen MP - TMP-108

These compact cabinets are designed for vertical or horizontal use (including stage monitor use), with rotatable horns to tailor dispersion to the application. Stacked on a sub woofer, mounted on a pole, flown (using the factory fitted Penn-Elcom flying points) or at your feet as a high power monitor, the Tessen MP range is the ideal compact and flexible sound reinforcement solution for your live or install needs. Easily portable, but discreetly styled for install. Tessen MP will fulfil your requirements.

Overview

The new TESSEN TMP-108 builds around the amazingly compact and elegant cabinet design to produce an enclosure that is at home almost anywhere. FH and monitor applications are handles equally well by the 8

Specification

Cabinet15mm MDF
FinishHardwearing black spatter paint
Grilleheavy gauge steel with acoustic foam front
Handles1 x Slot
Pole mount fitting35mm steel
Cabinet fittingsIndustry Standard Penn Elcom M10 x 3
Dimensions (HxWxD) (mm)435 x 260 x 240
System TypePassive 2 way Multi-purpose PA system
Sensitivity ([email protected])95dB
Max SPL (calc)118dB
WooferHH HA-426D. 8" driver
Mounting PointsIndustry Standard Penn Elcom M10 x 3
FeetCustom recessed low profile HH rubber feet
Cabinet taper (trap / wedge)50
Xover Freq3.2kHz
Horn dispersion (H x V90 x 60 (rotatable)
TweeterHH GS-506N 1" exit compression driver
Frequency response (-10dB)55 - 20kHz
Frequency response (-3dB)65 - 18kHz
CoolingConvection via external heatsink
ProtectionComprehensive protection circuitry and clip free limiting
Connections2 X Speakon Compatible sockets
Power Peak720W
Power prog360W
Power RMS180W
Impedance8 Ohms
Recommended Amplifier Power100 - 450W
Xover Type/Slope18db/Octave passive filter with air cored inductors
Packed Weight13.65 Kg

Technologies

HH-pa-woofer.jpeg

PA woofers

Many aspects must be considered in PA woofer design: Is it for a sub or a front-of-house cab? If front-of-house, what compression driver will it be used with? What size and type of cabinet must it suit? How many drivers will be in the cab?
HH-tessen-speaker.jpeg

Tessen Range Speakers

All Tessen systems have cast frame, designed-for-purpose woofers with highly efficient ribbon wire coils, massive magnet structures and glass-fibre reinforced felted cones with long excursion surrounds.

Total Quality Approach

Quality doesn’t just happen.
HH-total-system-design.jpeg

Total System Design

Total System Design

Front of House Cabs

The main PA facing the audience is the vital link between your talent and your audiences perception.

Passive Front of house

Designed using our
HH-subwoofers.jpeg

Subwoofers

Subwoofers don

Active Sub woofers

A 500W RMS Class D amplifier combined with a switch-mode power supply drive purpose built woofers with ribbon wire coils and large high grade magnet systems to create highly efficient and responsive subwoofer systems.